 2004 Jeep Grand Cherokee, Starts and Stalls
Hello and good day people;
2004 Jeep grand Cherokee, 4.0.
Here's the scoop. I put my key in the ignition and turn to the on position and no guages come up. the vehicle starts and stalls. My windows will not work, and when i try to unlock the electric locks from the drivers door it only unlocks the drivers door. My Display above is cleared of all info. I put by OBDII scanner on and scanned for codes and got the all clear sign. During the time i had the tool plugged in my guages came up and the vehicle started. During my drive home all guages went back down but jeep seems to be running ok, no speedo, no tach, no oil press, no gas, wt heck is goin on? So i decide to scan the vehicle while it is running and i get code P1686. My scanner tells me it's "Mfg Controller, Auxiliary inputs and outputs, i look on-line for code P1686 and it says "Driver 5, Line 6" Whatever that means. I do not have a second key, to eliminate that possibility with the anti theft thingy. When i use the remote to unlock the doors it does not unlock drivers door, and lights do not come on when i open the door. I do not have remote start. Any ideas? Thanks for your time.
Bob Out.  | 
Linear Mode
